OVERVIEW
Grid Entry is a tool in Supervisor Tools. It helps a supervisor enter time and job costing for a crew at the end of the day. You pick one project. Then you fill in a grid. The grid lists your crew down the left side and your cost codes across the top.
Terms used in this article:
- Grid: A table. Employee names are on the left. Cost codes are across the top.
- Cost code: A label that shows what kind of work was done.
- Add-on: A tool, trailer, or generator that goes with a piece of equipment. You can add up to 20 add-ons to one piece of equipment.
Before you start:
- Supervisor Tools work only on the BusyBusy mobile app for iOS and Android.
- Your Position needs the Manage Time permission to use Supervisor Tools. To learn more, see Positions & Permissions Settings:
- The names on the grid come from your crew list in Supervisor Tools. The first time you open Supervisor Tools, the app asks you to select crew members.
- Each Grid Entry is for one project. If your crew worked on more than one project, create one grid for each project.
CREATE A GRID ENTRY IN SUPERVISOR TOOLS
1. In the BusyBusy app, tap the three-line icon at the top left of the screen.
2. Tap Supervisor Tools.
3. Tap More at the bottom right of the screen.
iOS: 3 horizontal dots in the bottom right corner.
Android: 3 vertical dots in the bottom right corner.
4. Tap Grid Entry.
5. Tap Create Project Grid (bottom of the screen). If you have not saved a grid yet, the screen says "No Time Entries."
6. Tap Project. Select the project your crew worked on.
7. Tap Start Time. The start time begins at 7:00 AM. Select the hour and minutes your crew started work.
8. Tap Break. The break begins at 0 hrs 30 min. Select the length of the break in hours and minutes.
9. Copy From Previous Day. Use this when your crew works on the same cost codes and equipment as an earlier day.
10. Tap Next at the top right of the screen.
11. Select the cost codes your crew worked on. Tap Next at the top right of the screen.
12. The grid opens. Employee names are on the left. Cost codes are across the top. The Breaks and Total columns are on the right.
13. Tap an empty box under a cost code. The box turns light blue.
14. Tap Enter Hours at the bottom of the screen.
15. Select the hours and minutes. Tap OK.
16. Repeat steps 12 to 14 for each box.
17. Tap Save at the top right of the screen.
The Grid Entry screen now shows a card for your grid. The card shows the project name, employees, cost codes, equipment, hours, and breaks.
| Tips: - To give every employee the same hours for a cost code, tap Select All under that cost code. Tap Enter Hours and enter the time once. Select All under Breaks works the same way. - To add a cost code you forgot, tap +ADD COST CODES at the bottom of the grid. - The Total column does not include break time. |
Here is a videos that will walk you through how to use our Grid Entries feature, and what that looks like!
Grid Entries are Fast! (Video)
COPY A PREVIOUS DAY'S GRID IN SUPERVISOR TOOLS
Use this when your crew works on the same cost codes and equipment as an earlier day.
1. In the BusyBusy app, tap the three-line icon at the top left. Tap Supervisor Tools. Tap More. Tap Grid Entry. Tap Create Project Grid.
2. Tap Project at the top. Select the project for today's grid.
3. Under Copy Items, turn on Copy From Previous Day.
4. Tap Project under the toggle. Select the project you want to copy from. This can be a different project.
5. Tap Date. The date starts on today. Select the day you want to copy from.
6. Copy Cost Codes and Copy Equipment are both on. Turn one off if you do not want to copy it.
7. Tap Next at the top right of the screen.
8. The cost code list opens. The cost codes from the earlier day are already selected. Change the selection if you need to. Tap Next.
9. The grid opens with the cost codes and equipment already in place. The hour boxes are empty.
10. Tap a box. Tap Enter Hours. Select the hours and minutes. Tap OK. Repeat for each box.
11. Tap Save at the top right of the screen.
ADD EQUIPMENT TO A GRID ENTRY IN SUPERVISOR TOOLS
1. On the grid, tap the name of the employee who used the equipment. A menu opens.
2. Tap Add Equipment.
3. On the All Equipment screen, check the box next to the equipment the employee used.
4. Tap Next at the top right of the screen.
5. The Select Add-Ons screen opens. Each piece of equipment shows Add-Ons with "0 selected."
6. To add add-ons: tap Add-Ons. Make your selection. Tap the back arrow at the top left of the screen. Add-Ons now shows how many are selected. Tap Done.
7. If you do not need add-ons, tap Done.
8. The equipment shows in a yellow row under the employee's name. If the equipment has add-ons, the row shows the number of add-ons, for example "2 Add-Ons."
9. Tap a box in the equipment row. Tap Enter Hours. Select the hours and minutes. Tap OK.
10. Tap Save at the top right of the screen.
Notes about equipment hours:
- Equipment hours also show in the employee's hours. Check each employee's Total before you save.
- Hours you enter for an employee do not go to the equipment.
- Each add-on has its own box for hours.
- Add-ons use Multi-Equipment Tracking. An admin turns it on in Settings > Time Keeping on the web. To learn more, see FAQ: Multi-Equipment Time Tracking:
CHANGE ONE EMPLOYEE'S START TIME IN A GRID ENTRY
On the grid, tap the employee's name. Tap Change Start Time. This changes the start time for that employee only. The project and the other employees do not change. The start time shows under each name on the grid.
ADD OR REMOVE CREW MEMBERS FOR GRID ENTRY IN SUPERVISOR TOOLS
1. On the main screen of any Supervisor Tools tool, tap the three-dot icon at the top right of the screen.
2. Tap Manage Crew.
3. Check or uncheck the employees you want to keep or remove.
4. Tap Done or Save.
To learn more about crew lists, see Use Supervisor Tools to Make Life Easy:
NOTES
- A Grid Entry cannot go past midnight. If your crew worked overnight, create one grid for each day.
- When you save, BusyBusy creates the time entries in the order of the cost codes on the grid, starting at the start time.
Grid Entries Walk Through (Video)
Here is a videos that will walk you through how to use our Grid Entries feature, and what that looks like!
