Skip to main content

Enter Hour Meter and Mileage Readings (Mobile)

This article goes over how to enter an hour meter or odometer reading at clock-out.

Overview

Hour and mileage maintenance schedules count down from the readings entered in BusyBusy. The easiest way to keep those readings current is to have your crew enter them when they clock out of a piece of equipment.

This article explains how to:

  • Enter an hour meter or odometer reading at clock-out

  • Understand how readings keep your maintenance schedules accurate

Before You Begin

  • The employee must be clocked in to the equipment.

  • The equipment must have an hour or mileage tracking enabled under the Equipment Details.

On Mobile

Enter a Reading at Clock-Out (Mobile)

Use this method when you're finishing up on a piece of equipment.

Steps:

  1. Clock out as you normally would.

  2. When prompted, enter the current Hour Meter or Odometer reading from the machine.

  3. Finish clocking out.

BusyBusy saves the reading and updates the countdown on that equipment's maintenance schedules (if Equipment Maintenance is enabled for the account.)

What Happens After You Enter a Reading

  • The hours or miles left until maintenance update on the Maintenance Tracking Screen.

  • If the reading puts the equipment inside the reminder window, its status changes to Due Soon.

  • If the reading puts the equipment past its service interval, its status changes to Overdue.

Important Notes

  • Readings can be entered manually or if GPS tracking devices are used, BusyBusy can pull them from there.

Frequently Asked Questions

What if someone skips the reading?

The countdown stays where it was until the next reading comes in. If readings get skipped, hour and mileage schedules will fall behind what's actually on the machine.

Do I need a GPS tracker to use hour or mileage schedules?

No. Readings can be entered by hand. BusyBusy’s GPS trackers can also send readings automatically if they’re being used.

Did this answer your question?